Maytag Dishwasher Not Filling With Water
We often face some issues while using Maytag dishwasher. Many people complains their Maytag dishwasher not filling with water and want to know its reason.
Knowing the root of the problem is a step to fix it. So, you must know the particularly why your Maytag dishwasher is not filling with water.
This article will help you by describing the most common causes of the problem with their solutions. Scroll till the end.
The Most Common Causes Of Your Maytag Dishwasher Not Filling With Water
Faulty Household Water Supply
Your Maytag washer’s requirement for clean water is the most essential supply it can get its hands on. Some models may only require a supply of cold water.
However, other may need a consistent supply of both hot and cold water from your home’s indoor water supply. If you are unsure which model you have, consult the manual.
Not only does the dishwashers need a consistent supply of water in order to function properly, but the water that is delivered to it also needs to be at the appropriate pressure levels.
In this technique, the water can fill up the washer drum to wash your garments as many times and as frequently as is required while the cycle is running.
In the event that a Maytag dishwasher does not fill with water, the first thing you should do in the process of troubleshooting should be to check the water supply in your home.
To do this task in the quickest possible manner, you should turn on any adjacent faucets, such as the ones in your kitchen or bathroom.
This will assist you in determining whether or not your household is experiencing a disruption in the water supply.
You need to let the local water company know if there is a problem with the water supply to your home if there is a disruption. There may be a problem occurring in the outside world that is out of your hands.
If, on the other hand, you discover that the problem is located inside your home (that is, after the water meter), you will have to investigate the plumbing to find out what is causing the water to not flow to the locations where it is required.
If you are unable to identify the source of the issue on your own, you should consider seeking assistance from a licensed plumber instead.
Problematic Hot And Cold Water Faucets
There will be a faucet controlling the flow of water to your dishwasher, just like there will be a faucet controlling the flow of water to any other water outlet found throughout the plumbing in your home.
Obviously, if your Maytag washer has an entrance for both hot and cold water, then there will be two water faucets instead of just one to correlate with the machine rather than just one.
If these faucets are left open, water will be able to freely pass through them without any obstructions.
On the other hand, they are also able to be closed in order to stop the flow of water and prevent floods.
This capability is essential, for example when you need to detach the hose that is attached to the water inlet valves on the dishwasher.
There are two different kinds of problems that could occur with water faucets.
To begin, it is possible that the faucets are either completely shut off or do not have enough of an opening.
Keep in mind that in order for a Maytag washer to fill with water, both the hot and cold water faucets need to be open at the same time. This is a requirement.
In addition to that, there is also the possibility that the sink’s faucets are broken or clogged.
When this occurs, there will be a disruption in the normal flow of water through them, and the washer will not fill up as it should.
First things first, double check that all of the faucets are fully open. If the issue continues, you will be need to purchase brand-new faucets in order to fix the problem.
Faulty Water Inlet Hose
There will be one or two water inlet hoses bridging the gap between the water faucets on your household plumbing and the water inlet valve on the Maytag washer.
This will allow water to enter the washer. Each hose is normally constructed out of rubber, and it is secured to the faucet as well as the connection ports on the water inlet valve that is located on the rear of the washer using a screw.
If there is no water flowing through the water inlet line and into the washer, the water inlet hose is probably kinked or obstructed, as this is the most likely cause of the problem.
The water inlet hose is attached to the water inlet valve that may be found at the rear of the washer.
If the dishwasher is pressed up against the wall, it may cause the hose to become compressed, which will prohibit water from passing through.
In addition to that, there could be a leak in the hose, which would result in water being directed away from the dishwasher rather than being sucked into it.
To rectify this situation, all you will need to do is install a brand-new water intake hose in its place.
These hoses are normally available at extremely reasonable prices. In addition to that, the procedure for the replacement is quite easy to apply.
Unscrew the water inlet hose from both ends, then screw the replacement hose into its place. This is all that is required to replace the hose.
As soon as that is finished, check that there is sufficient space between the back of the Maytag washer and the nearest wall.
If there is not enough space, the washer may not be able to spin properly.
This will prevent the replacement hose from becoming compressed, and it will also allow water to flow through the hose without any interruptions.
Damaged Water Inlet Valve
Your Maytag washer has a component known as the water inlet valve that is responsible for controlling how much water is let into the machine.
You may locate it on the back of your dishwasher, where there are ports that link to the water inlet hose that was discussed earlier.
Additionally, as was indicated previously, many models of Maytag washers are capable of receiving both hot and cold water supply simultaneously.
On these models, the water inlet hoses from both sides of the washer will connect to the same water inlet valve that is located on the back of the washer.
Before beginning the washing cycle, the water inlet valve must first be opened, which enables water to begin filling up the drum.
The inlet valve will close as soon as the appliance detects that there is sufficient water in the drum, which will stop any additional water from being poured in.
In order for the water intake valve to function properly, the water that is being introduced into the system must have the appropriate pressure.
Therefore, the first possible explanation for why your Maytag washer isn’t filling is that the water pressure isn’t high enough.
In addition to that, there is also the possibility that the screens in the water entry valve are clogged with debris.
These little screens are constructed right into the valve so that any debris or foreign particles in the water. It can be filtered out before they have a chance to become trapped in the washer.
Last but not least, there is also the possibility that the inlet valve itself is broken. When this occurs, the valve will not open as it should at the appropriate time.
Because the valve is locked in the closed position, there won’t be any water in the washer drum to wash the garments that are inside.
- Checking the water pressure in your home should be the first step in finding a solution to this problem. A problem with the plumbing in another part of your home could be the cause of the low water pressure.
- The next step is to remove any trash or foreign objects that have become lodged within the screens that are located inside of your water inlet valve.
- In the event that the issue is not resolved, you will be required to replace the water inlet valve on its own.
- The back of the Maytag dishwasher is where you’ll find the valve. Therefore, in order to obtain access to it, you will need to remove the rear panel.
- First, you need to disconnect the water inlet valve’s electrical connectors, and then you need to unthread any screws that are holding it in place.
- After that, reattach the electrical lines and mount the replacement valve in its previous location.
Faulty Drain Pipe Or Standpipe
One end of the drain hose is attached to the back of the dishwasher, while the other end is linked to the drainpipe (or standpipe).
At the conclusion of the washing cycle, it is designed to facilitate the discharge of dirty water from your Maytag washer into the plumbing system of your home in a timely manner.
When the drain hose is inserted into the standpipe, it bends into the shape of a U to prevent any obstructions to the flow of water.
Because water is being continuously drawn out by gravity through the drain hose in this situation, your Maytag washer won’t fill with water like it normally would.
This issue arises as a result of a siphoning action that takes place when the height of the standpipe is less than 30 inches.
The water flow through the drain hose will produce a sucking action when the height of the standpipe is less than 30 inches.
To put it another way, once your Maytag dishwasher fills up with water, gravity and suction will rapidly cause the water to drain out of the machine.
Therefore, the problem is not with any of the components that make up the washer itself; rather, the issue lies with the standpipe.
This issue can be remedied without making any adjustments to the Maytag washer itself in any way.
You will, nevertheless, be required to redo the standpipe that is located where the drain hose of the washer is inserted.
At the very least, the height of the standpipe ought to be thirty inches, which is equivalent to 76.2 centimetres.
A measuring tape should be used to determine this height from its starting point on the ground.
FAQs about Maytag Dishwasher not filling with water
Can A Faulty Float Switch Cause Maytag Dishwasher Not Filling Water?
A faulty float switch may be causing power interruptions and trouble the water filling process.
When water fills a dishwasher during a wash cycle, a little piece of plastic will float to the surface.
If this switch lacks connectivity or is broken, the water inlet valve may not open, preventing water from entering the dishwasher.
What To Do If Maytag Dishwasher Stops Filling Water Because Of Faulty Float Switch?
Check that the float arm mechanically activates the float switch when the float reaches the top of the water heater when the dishwasher is unplugged.
In addition, ensure that the wires exiting the float switch are not frayed.
Can A Faulty Door Switch Prevent The Maytag Dishwasher From Filling With Water?
A door switch is a basic on/off mechanism that disables the dishwasher when the door is open.
If the door switch is defective, the dishwasher will not fill with water.
In order to test the probes of the door switch, a multimeter is required.
What Should I Do If My Maytag Dishwasher Doesn’t Fill Water Because Of A Faulty Door Switch?
Unplug the dishwasher first.
Open the door and unscrew the inner door panel.
When you remove this panel, you will discover the door’s latch assembly at the door’s top.
Insert the catch manually into the latch assembly, and observe whether closing the latch activates both switches.
If so, use a multimeter to test the two switches for continuity.
Now you know the reasons and the solutions of your Maytag dishwasher not filling with water. There maybe several causes and identifying them is a must for you.
The sooner you will identify the causes, the better it will be for your dishwasher. We hope our information will highly help you to solve your problems regarding not filling with dishwasher.