Are Magic Bullet Cups Dishwasher Safe?
The Magic bullet is one of the newer generations of compact blenders. People often ask, “ Are the magic bullet cups dishwasher safe?”
Cups are a crucial part of your magic bullet blender. So, you must know how to wash it without making any harm.
This article will answer your question. Also, we will describe how to clean your magic bullet blenders.
Are Magic Bullet Cups Dishwasher Safe?
Yes, magic bullet cups are 100% dishwasher safe. These cups are made of plastic that doesn’t contain BPA and can be washed in a dishwasher without any problems.
However, you will have to put them on the top rack of your dishwasher. Because the high temperature of the bottom rack can spoil the quality of plastic.
How To Clean A Magic Bullet Blender
Step 1: Unplug From The Power Source And Disassemble It
Always unplug the Magic Bullet blender from the power source before cleaning or assembling the device.
It is essential that you are aware that, in contrast to the cups, the blades cannot be cleaned in the dishwasher.
According to the user manual, the blades can be cleaned in warm water with little dish soap.
Disassemble it and, before cleaning it, unscrew the blade from the section of the cup that it is attached to, if it is still attached to the cup.
Step 2: Wash The Cup
You can hand wash the cup, or you can put it on the top rack in your dishwasher. Hand washing the various components of a blender is a perfectly safe practice at any time.
Wash the interior and exterior of the pieces thoroughly using dish soap and a sponge by running warm water over them and using the dish soap.
On the other hand, given that the cups may be cleaned in the dishwasher, a more convenient method would be to put them on the top rack of the appliance while it was operating on the standard wash setting.
Avoid using the sanitize cycle or putting any parts of the Magic bullet into boiling water. These practices could potentially spread bacteria.
Step 3: Clean The Blade
Clean the blade with some liquid soap and some water. At all times, the component elements of the blade need to be cleaned by hand using soap and water.
Put two drops of dish soap on a sponge, and then use the sponge to wipe under the blades and remove any food that has accumulated there.
In order to avoid cutting yourself accidentally, you should always keep your fingers away from the blade’s pointed edges.
It is not possible to clean the blade in a dishwasher since the intense heat would cause the plastic parts to melt.
Step 4: Dry Them
To complete the drying process, use a dry rag to dry the outside as well as the internal components of the cup, as well as the blade.
After you’re done with them, put them on the drying rack so they may get some air before you reuse them.
Step 5: Clean The Power Base
To saturate a rag, run it under some warm water and then wring it out completely. Both the exterior and the interior of the power base should be thoroughly cleaned.
Take out any food or other objects that have become stuck at the base of the blender.
The power base cleaning process can also be sped up by using a citrus-based cleaner.
Citrus cleaners make use of the natural oils in the fruit to eliminate stubborn food build-up and stains. In addition to that, they scrub the power base.
How To Clean Your Magic Bullet Blender With Soapy Water?
- Make a soapy water mixture to clean the interior of your magic bullet. To make a soap and water mixture, fill the blender cup up to two thirds of its capacity. Add some roughly cut lemon with the mixture.
- Connect the milling blade to the cup by tightening the screw that secures the milling blade to the bottom of the cup by turning the screw in the counter clockwise direction.
- Connect the cup to the power base. After you have connected the soap, water, and milling blade, place the cup on the power base and lightly press down until the exterior blade begins to rotate. Mix the liquid soap, water, and lemon together for up to a minute and a half.
- After the contents have been removed, the cup should be washed under running water.
- Before reusing the cup and the blades, you should wipe them down with a rag and then let them dry naturally.
FAQs about cleaning Magic Bullet cups and Blender
Which Magic Bullets Parts Are Dishwasher Safe?
Magic Bullet cups, lids, and lip rings can all be washed in the top rack of the dishwasher.
Before putting them in the dishwasher, you should rinse them.
Also, keep in mind that you should never use the sanitize cycle when washing these parts in the dishwasher because it could damage the plastic.
What Should I Avoid While Cleaning Magic Bullet Cups?
Do not use your dishwasher’s sanitize cycle to clean Magic Bullet cups.
Some dishwashers have this cycle, which cleans dishes by heating the water to a high temperature.
The Magic Bullet cups can melt in this high heat.
How To Clean Magic Bullet Cups That Are Cloudy?
The cloudiness can be taken care of by adding 10% bleach to the water.
Fill the Magic bullet cup, let it sit for a few minutes, then empty it, rinse it, wash it with warm soapy water, and rinse it again.
How To Clean The Blades Of A Magic Bullet?
Hand-wash your blades with warm, soapy water and a dish brush to get rid of anything stuck on.
If you want to clean the blade better, rinse it with a 10% solution of vinegar and water or lemon juice.
We suggest hand-washing dishes instead of putting them in the dishwasher because the heat from some dishwashers can damage the gaskets and make them loosen and fall out.
People often think that to clean their blade properly, they have to take off the gasket.
The blade’s gasket should never be taken off. This makes the gasket less tight, so it can’t do its job as well.
Also, if you take apart your Magic bullet blade or power base, your warranty will be void.
What Is The Easiest Way To Clean A Magic Bullet Blender?
Fill your cup with warm water and dish soap, screw on the extractor blade, and run your magic bullet for 20 to 30 seconds.
This is a quick and easy way to clean stuck-on food. This will loosen any stuck-on food, and a quick scrub and rinse will be all you need to clean the cup and blade.
Final Thoughts
We hope you have found the answer to the question, “ are magic bullet cups dishwasher safe?”
Most of the parts of your Magic bullet blender along with magic bullet cups are totally dishwasher safe.
Be conscious about keeping them always in the top rack and not using the high temperature sanitizing option. Also, keep the magic bullet cups clean soon after you use it.
