Dr. Brown bottles are popular among kids’ moms for having a comfortable and healthy feeding experience. But the bottle includes plenty of parts, making it daunting to clean by hand frequently which encourages parents to use a dishwasher.
But you shouldn’t process without learning are Dr. Brown bottles are dishwasher safe or not for the safety of the bottle and the kids as well.
Following, we have mentioned whether or not you can put Dr. Brown’s bottle in the dishwasher and some helpful tricks to get a safe and thoroughly clean bottle out of the dishwasher
Are Dr Brown Bottles Dishwashers Safe?
Dr. Brown clearly understands the hassles of being a new mom. That’s why they made their bottle completely dishwasher safe. It means all the parts of the Dr. Brown bottle, including its nipple, vent, and caps, are compatible with the dishwasher.
However, you should place the bottle on the top shelf of the dishwasher for secure cleaning.
How To Wash Dr Brown Bottle Using The Dishwasher?
Though Dr. Brown’s bottles are dishwasher safe, it doesn’t mean you will get a safe and clean bottle every time you use a dishwasher. Cleaning a plastic bottle requires a safe yet appropriate process to make the task successful.
Take the bottle apart
You must disassemble the Dr. Brown bottle before putting it in the dishwasher. Take its cap, nipple, nipple collar, vent reservoir, vent insert, travel disc, and other parts apart.
Read More: Are Yetis Dishwasher Safe?
Place all the parts in the basket
During washing, little parts of a bottle can fall down to the bottom of the dishwasher and get damaged by contact with the heating element.
Place all the small parts of the dishwasher in the basket so they can remain safe while running the cycle.
Place the bottle on the top rack
Now place the bottle on the top rack of the dishwasher. The reason is that Dr. Brown’s bottles are made of plastic. These may appear to be strong, but if exposed to heat, they will dissolve and cause damage. So putting the bottle on the top rack is a major safety precaution.
Run the dishwasher
After placing all the parts and bottle security in the dishwasher, add some detergent and turn it on. Though you can apply any of your preferred cycles, the sanitizer cycle is more helpful. After completing the washing cycle, run a dry cycle to steam clean the bottle and its parts.
Dry the bottle
Though the dishwasher will produce an almost dried bottle, there may still be some residual moisture on the parts.
Wipe the bottle and its parts with a towel to thoroughly dry them. You can also leave all the parts out to air dry for a few hours to make them dry completely before reassembling.
Clean the Dr Brown Bottles by Hand
Disassemble the bottle
Typically, Dr. Brown’s bottles have more components than other baby bottles. To clean the bottle manually, you must disassemble all its parts.
Make a solution in the kitchen sink
Take a clean kitchen shank and fill it with hot water. Then mix some dishwashing liquid into the water and make a solution.
Soak the bottle in the solution
Now place your Dr. Brown bottle and its parts into the solution and wait for around 30 minutes. Once the bottle soaks in the warm soapy water properly, scrub it and all parts thoroughly with a small brush.
Scrub all the grooves, holes, and other nooks to clean the bottle completely. Some of Dr. Brown’s bottles include a brush to help make the job easier without extra investment.
Rinse the bottle thoroughly
The next task is to drain the soapy water out of the kitchen sink. Simply turn the faucet on and rinse the parts with warm water to prevent any remaining soapy or dirty water.
While rinsing the bottle components, make sure the nipple hole has been cleaned completely.
Dry the bottle completely
Dry the bottle and all other pieces completely before reassembling them. It’s good practice to prevent mold from growing. You can store all the parts in a drying rack overnight to make them dry completely.
Is sterilization still necessary?
Sterilizing the Dr. Brown bottle helps remove the bacteria that can cause vomiting or diarrhea in your baby.
Though some people suggest sterilizing the Dr. Brown bottle only if a harbor of bacteria exists in the tap water, you shouldn’t be too lenient, especially when it is related to the baby’s safety.
Sanitizing the Dr Brown Bottles by Boiling
Disassemble the bottle
Before sterilizing Dr. Brown’s bottle, disassemble the bottle and its components. Then wash them with your desired method, whether it is in the dishwasher or by hand. A new Dr. Brown bottle is also essential to sanitize.
Fill the pot with water
Collect a medium or large container to sterilize the bottle. Add enough water to the container so you can soak the bottle and other pieces properly, both lying down and standing up.
Boil the water
Now set the pot on the stovetop and start heating the water until it boils. It may take around 10 minutes.
Soak the bottle parts in water
While boiling the water, carefully add your Dr. Brown bottle and its components to the pot and wait for 5 minutes. Use a pair of tongs to place the bottle in the boiling water safely.
Turn off the heat
Now shut the heat off and remove the container from the stove. Wait around half an hour to let the water cool.
Remove the bottle pieces and dry them
Take your bottle and other pieces out of the cool water and wipe them with a clean towel to dry completely.
Is Dr. Brown’s Bottle Long-Lasting?
Baby bottles aren’t designed to last a lifetime, especially if they are made of synthetic materials. Dr. Brown bottles typically last for 2-3 months on average if used regularly. Despite this, Dr. Brown’s bottles don’t have a shelf life, so they are suitable for storing for years.
Is Dr. Brown’s Nipple Compatible With Other Baby Bottles?
Though the nipple of the Dr. Brown bottle fits in other baby bottles, you shouldn’t attach it to others. Dr. Brown bottles are uniquely intended with venting in mind. It means Dr. Brown’s baby bottle nipples are designed to be used on vented bottles. Otherwise, the nipple can feel colicky. Though not life-threatening, this incorrect combination can cause your baby to cry.
Dr Brown bottles are designed with an Anti-colic vent system to reduce spit-up, and colic and properly preserve nutrients, making them the most desired baby bottles.
It’s also reliable among new moms from feeding babies to keeping the bottle clean.
As now you know dr brown bottles are dishwasher safe and the way to clean them thoroughly, and offer healthy food to your baby will be much more straightforward.