Whirlpool Dishwasher Error Codes
A Whirlpool dishwasher is unlike any other type you will find. It has a distinctive feature called Whirlpool dishwasher error codes.
That is, very system is unique, and each has its own set of flashing lights or error sequence to indicate a problem.
Understanding their significance can be crucial to ensuring that you respond appropriately to a problem and get it fixed.
This article is about the most common error codes which will help you to detect your dishwasher issues easily.
Whirlpool Dishwasher Error Codes
Error Code F1
Whirlpool’s Error code F1 is going to be the first one that we investigate, so get ready. A single blink of the system’s light could also alert you to the presence of this issue.
Nevertheless, regardless of how you choose to interpret the message, you will arrive to the same conclusion.
It indicates that there is an issue with the temperature sensor of your dishwasher.
It is most of the time results in issues in regulating the temperature of the water that is being used to clean the dishes.
When the machine’s sensors determine that it is working at a temperature that is outside of the acceptable range, the notice is displayed on the screen.
There are scenarios in which you can heat up the interior and then give it another shot. However, there are also scenarios in which the heating element is broken.
If you are doubtful, it is best to seek the advice of a specialist.
Error Codes F2 And F3
Both codes are associated with the water systems in a dishwasher and point out problems with them.
Two flashes, often known as Error code F2, indicate that the system has identified a water leak in one of its many components.
Because you cannot immediately fix this problem on your own, you will need to involve us in the process.
The Error code F3 indicates that there is a problem with the heating system, which is responsible for producing hot water for washing dishes.
You need to begin by inspecting the heating element to determine whether or not there is an urgent malfunction.
In the event that you are unable to spot an inaccuracy on your own, it is in your best advantage to get in touch with a trained specialist.
Error Code F4
The fourth Error code is denoted by four flashes, and it indicates that the water drainage mechanism in the dishwasher is not working properly.
You have the ability to explore this issue on your own, and you can do so by ensuring that there are no obstructions or debris in the areas surrounding the drains where the water is supposed to go.
Error Code F5
The spray arms have failed to work properly as a result of being blocked, which results in the F5 Error.
You can quickly get rid of them and investigate the problem on your own, which is a relief considering how serious the situation may have been otherwise.
You can even wash them to ensure that they are as clean as they can possibly be, and after that, you can put them back into your machine and give them another shot.
Error Code F6
There are likely to be some circumstances in which your Whirlpool appliance will display a total of six flashes.
This event is indicative of an Error code that is designated as F6.
The error code F6 tells us that the dishwasher is not detecting any water being introduced into the system. The water inlet valve may or may not be open.
Naturally, an occurrence like this can be quite aggravating. The first thing you’ll need to do in this situation is to check the water supply to ensure that it is properly connected.
If this is the case, then you can move on to the next step. You should also check to see if there are any issues regarding blockages or kinks in the system.
It is in your best interest to do so.
Error Code F7
When there is a problem with the flow meter, the Error code F7 will be displayed on the screen.
This is a typical issue with dishwashers, and the good news is that it can be fixed with a replacement part.
However, before you do that, you should make sure that you have ruled out the possibility that the issue is caused by the water supply.
Error Code F8
The next error code that we have on our list for our Whirlpool appliance is the F8 error code.
These flashes suggest that there is an issue with the turbidity of the water. It is another way of saying that the water is excessively unclean.
In most cases, this isn’t a problem because nearly all dishwashers have an integrated system that cleans the water.
However, there are some instances in which you’ll need to inspect it on your own to ensure that there isn’t a significant blockage or that things aren’t too dirty.
Error Code F9
It indicates that your system is having trouble dealing with an excessive amount of water.
The Whirlpool Error Code F9 is considered to be one of the more frustrating Error codes.
You can find out the solution to this problem by examining the water inlet valve and determining whether or not it is obstructed in any way.
Error Code F0
We’ve now entered our first flashing in the double-digit range.
Because of the way the system is designed to operate, only an engineer will be able to recognize that this series of flashes indicates a malfunctioning sensor.
Out Of Numbers – Failure To Appear
FA consists of 11 flashes, but we’ve pretty well moved past the idea of numbers at this point.
Since excessive levels of water turbidity are the cause of the F11 Error code, the remedy is to either return to the F8 troubleshooting step or get in touch with a qualified technician.
FB And FC
FB indicates that there is an issue with the motorized diverter valve, and FC indicates that there is an error in the water hardness.
You can get in touch with us at Just Fixed and we’ll make things right for you, as is the case with the majority of these problems.
FAQs about Whirlpool dishwasher error codes
What Does Whirlpool Dishwasher Error Code E1 Means?
It indicates that the system safeguarding the housing against leaking has sounded an alarm. In this situation, the bottom of the washing chamber, salt tank, and pipelines must be thoroughly inspected for leaks.
You must be able to see where water is dripping or already entering the pan. Additionally, you must inspect the dishwashing hoses for damage and repair them as needed.
What Does Whirlpool Dishwasher Error Code E2 Indicates?
This error indicates an electrical safety system violation. Probably, somewhere the wiring was left exposed, resulting in a current leak to the case.
If you furthermore sense tingling when touching the metal portion of the dishwasher, this is further confirmation that a leak has occurred, which is extremely hazardous.
The dishwasher must be immediately turned off, disassembled, and all wiring and contacts inspected.
What Can I Understand From Whirlpool Dishwasher Error Code E3?
this indicates that there are issues with the heating element. It is possible that the heating element, the thermostat, the power wiring, or the control board’s bus have all failed.
Using a multimeter, you will have to gradually inspect the aforementioned items. You should avoid going to the control module yourself, since you may exacerbate the issue.
What Does Whirlpool Dishwasher Mean By Error Code E4?
It means either the thermostat’s heating element had burned out or its supply wiring had been disconnected.
The thermostat must be tested with a multimeter, and if the component is functional, the wires leading to it must be thoroughly inspected. If both are functional, the problem lies in the control module.
Final Thoughts
Now you know What most of the Whirlpool dishwasher error codes mean.
The identification of your dishwasher’s problems becomes easier if you have some clear knowledge about the error codes.
We hope that the information we have given will be successful to help you in this regard.
Don’t just stop after identifying the error codes. Take the necessary steps to use your Whirlpool dishwasher for the long run.
