Are Keurig parts dishwasher safe? That’s a question that many Keurig owners have asked, and the answer is not always clear.
Some Keurig owners say that their parts have been damaged in the dishwasher, while others say they have been perfectly safe in the dishwasher. So, what’s the truth?
In this article, we will answer whether Keurig parts are dishwasher safe or not. And how to clean the keurig parts easily.
Are Keurig Parts Dishwasher Safe?
Most parts of this machine can safely clean in the dishwasher. However, a few parts of the Keurig machine can’t wash in the dishwasher. The water reservoir, drip tray, and lid all can wash on the dishwasher’s top rack.
However, some parts of the machine, like the K-cup holder and the water filter, can’t clean through the dishwasher.
How to clean dishwasher-safe Keurig parts?
If you have a Keurig coffee maker, you know that the dishwasher-safe parts can be a pain to clean. Thankfully, there are a few ways to make the process a little bit easier.
To clean your dishwasher safe Keurig parts, you will need:
- white vinegar
- baking soda
- hot water
- a toothbrush
- a microfiber cloth
Water Reservoir:
1. Fill your Keurig reservoir with white vinegar.
2. Add 1/4 cup of vinegar for every 8 ounces of water you plan to brew.
3. Swish the vinegar around and let it sit for a few minutes.
4. Run 2-3 hot water cycles through the machine to rinse it out.
5. Use a toothbrush to scrub the areas where coffee grounds tend to accumulate.
6. Use a microfiber cloth to polish up the exterior.
Drip Tray:
The drip tray is one of the most difficult parts to clean because it is difficult to remove and has a lot of nooks and crannies.
One way to clean the drip tray is to remove it from the Keurig and wash it in the dishwasher.
First, remove the drip tray from the Keurig. There are two tabs on either side that need to be released to remove the tray.
The tabs are located on the top and bottom of the tray. Once the tray is released, you can wash it on the top rack of the dishwasher.
Make sure that the drip tray is facing down so that the water can flow through the holes.
Lid:
Cleaning the K-cup lid of your Keurig can be a daunting task. Not only is it difficult to access, but the tiny crevices can be difficult to clean.
However, there is a way to clean your K-cup lid using your dishwasher!
The first step is to remove the lid from your Keurig. Next, fill up the dishwasher with hot water and add a dishwashing detergent tablet.
Place the lid in the dishwasher and let it run its cycle. Once the cycle is complete, remove the lid from the dishwasher and give it a final touch if it need.
The holder and funnel:
The coffee holder and funnel can all be safely cleaned in the dishwasher. To clean them, remove them from the coffee maker and place them in the dishwasher.
Be sure to use the top rack of the dishwasher and select the gentle cycle. The dishwasher will clean all of the parts without causing any damage.
How to clean the Keurig parts that are not dishwasher safe?
The first step in cleaning your Keurig water filter is to remove it from the machine. The water filter is located in the lid of the machine.
Gently lift the lid and remove the water filter.The next step is to rinse the water filter under warm water.
Be sure to rinse all of the coffee and grounds from the filter.The final step is to disinfect the water filter.
You can do this by soaking the filter in a diluted bleach solution for 10 minutes.
After 10 minutes, rinse the filter with warm water and allow it to air dry. If you want more precision-follow the below listed steps-
K-cup holder
If you have a Keurig and you want to clean the K-cup holder, all you need is a little vinegar and water. Fill up the reservoir with water and add about a cup of vinegar.
Turn on your Keurig and let it run through a brew cycle. Once it’s done, dump out the water and vinegar mixture and rinse everything off with cold water.
Water filter
The first step in cleaning your Keurig water filter is to remove it from the machine. The water filter is located in the lid of the machine. Gently lift the lid and remove the water filter.
The next step is to rinse the water filter under warm water. Be sure to rinse all of the coffee and grounds from the filter.
The final step is to disinfect the water filter. You can do this by soaking the filter in a diluted bleach solution for 10 minutes.
After 10 minutes, rinse the filter with warm water and allow it to air dry.
Note:
keurig 2.0 parts are not dishwasher safe. This instruction comes from directly the manufacturer end, only the water reservoir you may allow to wash through the dishwasher, otherwise remaining all parts are designed to wash manually.
FAQs:
Can I Take My Keurig Apart To Clean It?
Yes, you can take your Keurig apart to clean it. The first step is to unplug the machine and remove the water tank.
Next, unscrew the bottom of the machine and remove the drip tray. Finally, clean all parts and put back to assemble again.Be sure to dry everything off before putting it back together.
Can I Run Soapy Water Through My Keurig?
Do not pour soapy water or any other type of liquid into the Keurig. If you do, the Keurig will not work and you will have to take it apart to clean it.
Final Verdict:
Keurig coffee machines are one of the most popular brands on the market. Keurig machines come with various parts, some of which are dishwasher safe and some of which are not.
If you are thinking are keurig parts dishwasher safe or not, there are a few things you can do to find out.
First, check the Keurig website. The website has a comprehensive list of all of the different Keurig models’ partsicular model is not listed, you can call customer service and ask them whether or not.
